Aluminium coil sheet 1050 3003

Product Description

1. Alloy 1050 1060 1070 1100 3003 3004 3105 3104 5052.

2. Temper: Various Status

3, Thickness: 0.024-4.0mm

4, Width: 580mm----1850mm

5. Coating material: PE or PVDF

6, Colors: Can do as your requirement

7, PE/PVDF thickness:>25um

8, Color standard: E < 2 or it is not obvious by eyeballing

9, Pencil hardness: > 2HB

10, Coating adhesive: not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993)

11, Bend stength: >100 times

12, Boiling point: no any distortion and color change (in the 99 more or less 1 degree water, then cooling 2 hours)

13, Corrosive: surface deep in the 5% muriatic acid and 5% NaCL, interior deep in the 2% muriatic acid and 2% NaCL, after 48 hours, no change

14. Package: wooden pallet in horizon or vertical

Haomei aluminum  stocks a full range of aluminum coil and sheet in several alloys to service a multitude of industries. The non-heat treatable alloys of 1xxx, 3xxx, and 5xxxx are all strengthened by various degrees of cold working, as denoted by the "H" tempers.

The heat treatable alloys of 2xxx, 6xxx, and 7xxx are such that when subjected to thermal temperatures, they gain pronounced strengthening. Hence, tempers are indicated by "T". These alloys are also inventoried in clad form to increase corrosion resistance. All of the aluminum alloys are available in the annealed condition or commonly referred to as "O".
Aerospace - 2024, 6013, 6061, 7075
Construction - 3003, 5052, 6061
Electrical and Chemical Applications - 1100
General Machining Applications - 3003, 5052

Thicknesses from .012 through .190 are available for your immediate needs. haomei aluminium can process to your special requirements and support traceability with complete Mill Test Reports (MTR) and the essential industry specifications.