Specializing In Production Of Hot/Cold Rolled Products
Writer:Admin Time:Difference between Hot rolling and Cold rolled aluminum coils can be explained in so many different ways but the text book explanation is that hot rolling is rolling above the recrystallization temperature while cold rolling is rolling done below the recrystallization temperature. During hot rolling new equiaxed grains are formed while in cold rolling the grains are strained and need to relieved of this strain by annealing.
Cold rolled and hot rolled is two different types of steel rolling technology, as the name implies,
Cold rolled is copper under the condition of steel at room temperature, the hardness of the steel.
Our cold rolled aluminum sheet products :
commodity | alloy | temper | thickness(mm) | width(mm) | length(mm) |
normal aluminium sheet/coil | 1***3***5***6***8*** | various status | 0.2-8 | 300-1950-under | 9500/coil |
aluminum sheet for curtain wall | 1100,3003,5005 | H14.H24 | 1.50-4.0 | 300-1950 | Under9500 |
PS Substrate | 1060,1070 | H18 | 0.14,0.15,0.28 | 520-1050 | 380-1220 |
aluminium plastic composite base plate | 1100,3003 | H14,H16,H18 | 0.25-0.6 | 1000-1600 | under 6500 |
aluminium foil stock | 1235,8011 | H14,H18,0 | 0.2-1.0 | 800-1700 | coil |
Hot rolled is Copper steel in high temperature circumstances.
Our hot rolled aluminum sheet products :
commodity | alloy | temper | thickness(mm) | width(mm) | length(mm) |
hot rolled aluminium coil | 1***3***5***6***8*** | H2,H4,H6,H8,O,F,H12 | 2~10 | 950~1800 | coil |
hot rolled aluminium sheet | 1***3***5***6***8*** | H2,H4,H6,H8,O,F,H12 | 10~150 | 950~1800 | under6500 |
We specializing in production of hot cold rolled products more than 20 years,We would like to highlight our hot rolled aluminium coil,8011 thin aluminium sheet for caps and closures, aluminium coil Stock,aluminium lacquered,printed aluminium sheets with good quality and competitive price bottle cap material,Haomei aluminium closure sheet show very low earing, greatly reducing scrap rate for our clients.
We using an advanced nitrogen annealing furnace, our product has no oil patch on the surface. To ensure the quality of our products, we test the product by sampling at different positions and procedures, such as the smelting furnace, static furnace, cold-rolling equipment, etc.Looking forward to hearing from you and further cooperate, welcome to contact us in any time ,my Email: august@haomei-aluminium.com